Configuring SNMP Trap

To configure SNMP traps using the FlowVision GUI, navigate to Configuration > SNMP Traps.

The SNMP Traps configuration page lists connected devices and their respective configured SNMP Traps. You can select individual devices and define SNMP traps.

The following image shows the SNMP Trap page with the switches and configured SNMP Traps:

Configure SNMP Traps

To create an SNMP Trap,

  1. Configure the SNMP trap Server-ID, Version, Destination IP, Destination Port and community string

  2. SNMP Trap is now configured

Last updated