Management
This section verifies the mandatory functions for management operation in a Fabric
| Description | Test Case ID | PD | Topology |
|---|---|---|---|
Verify SPAN with source ports (and LAG) to the destination port in ingress/egress/both directions. | test_port_span_001 | Yes | |
Verify ERSPAN by configuring a mirror with the list of source ports/LAG to destination IP in ingress/egress/both directions | test_port_span_002 | Yes | |
Verify ERSPAN by configuring a mirror from ACL match to destination IP in ingress directions | test_port_span_003 | Yes | |
Verify whether SNMP configurations | test_snmp_config | No | |
Verify SNMP Get/GetNext/Walk requests MIBS: ENTITY, IF-MIB, IP-MIB, | test_snmp_commands | No | |
Verify Config load for incremental configuration | test_config_load | No | |
Verify IPv6 address configuration on Front Panel (Data) ports | test_front_panel_ports_ipv6 | No | |
Verify config reload to restore configuration | test_cfg_backup_restore | No | |
Verify syslogs are generated properly on link down/up | test_syslog_002 | No | |
Verify syslogs are generated properly on LACP UP/Down | test_syslog_004 | No | |
Verify SSH from host to SONIC on management interface | test_ssh_001 | No | |
Verify SSH from host to SVI interface and routed port | test_ssh_002 | No | |
Verify whether the session is successfully closed right after SSH disconnect from the client. | test_ssh_003 | No | |
Verify Tacacs+ with AAA authentication | test_tacacs_001 | No | |
Verify NTP server works as clock source correctly | test_ntp_007 | No | |
Verify timezone can be manually configured. | test_timezone_001 | No | |
Verify ping from SONIC SVI interface and routed port | test_ping_001 | No | |
Verify that ping works properly with multiple parameter combination | test_ping_009 | No | |
Verify that SONiC Version and serial information can be retrieved via SNMP_WALK command | test_snmp_walk_version_serial | No | |
Verify that SONiC interface index information can be retrieved via SNMP_WALK command | test_snmp_walk_inf_index | No | |
Verify that SONiC interface name information can be retrieved via SNMP_WALK command | test_snmp_walk_inf_name | No | |
Verify that SONiC interface admin and oper status info can be retrieved via SNMP_WALK command | test_snmp_walk_inf_admin_oper | No | |
Verify that SONiC interface type info can be retrieved via SNMP_WALK command | test_snmp_walk_inf_type | No | |
Verify that tagged ports vlan id can be retrieved using the SNMP_WALK command | test_snmp_walk_vlan_tagged_ports | No | |
Verify that untagged ports vlan id can be retrieved using the SNMP_WALK command | test_snmp_walk_vlan_untagged_ports | No | |
Verify that LLDP neighbor info. can be retrieved via SNMP_WALK command | test_snmp_walk_lldp | No | |
Verify that routing information can be retrieved via SNMP_WALK command | test_snmp_walk_ip_routing_info | No | |
Verify that SONiC IP interface index and netmask info can be retrieved via SNMP_WALK command | test_snmp_walk_ip_inf_index_and_netmask | No |
PD(Platform dependent) means that FTAS is designed to work with specific hardware and software configurations and may not be compatible with other platforms.
Last updated
