Display Flow Information
Use the following command to check the rate of data flowing through a flow:
Reference
Command
show flow (all | <flow-name> ) rate
Description
Display flow rate for a flow
Parameters
flow-name - max 20 characters
Mode
EXEC
Example
pbnoscli# show flow counters all rate
Flow-Name Rate (BPS) Rate (PPS)
===============================================================
flow1 0.15 B/s 0.00 P/s
pbnoscli#You can display the flow configuration and operational status as follows:
Reference
Command
show flow (all | <flow-name> rule <rule-id> )
Description
Displays all the flow configurations and rule configurations
Parameters
flow-name—max 20 characters
rule-id – within 1 to 6000
Mode
EXEC
Example
Use the following command to show the flow summary:
Reference
Command
show flow summary
Description
Displays the summary of all OPB flows
Parameters
None
Mode
EXEC
Example
Use the following command to display the counters of all the flows:
Reference
Command
show flow counters (all |<flow-name> )
Description
Displays the counters of all the OPB flows
Parameters
flow-name – max 20 characters
Mode
EXEC
Example
Last updated