Configuring Flow Override Action(s)

You can configure a rule to override the configured flow action for egress ports to push and/or pop VLAN. You can also override tool port(s) for egress traffic.

override-action is per-rule and will require override-action for every rule in the flow

Reference

Command

rule 1 action

override-pop-vlan Override action to pop the VLAN override-push-vlan-tag Override action to push VLAN Tag override-to Override to configure a rule specific network tool or analyzer ports

Description

Rule actions

Parameters

● ruleid: It should be in the range 1 to 6000 ● override-to: override egress ports ● override-push-vlan: override MAP push VLAN ● override-pop-vlan: override pop VLAN

Mode

FLOW

Example

pbnoscli# configure terminal 
pbnoscli(config)# flow flow01
pbnoscli(config-flow-flow01)# network-ports Ethernet4
pbnoscli(config-flow-flow01)# tool-ports Ethernet8
pbnoscli(config-flow-flow01)# rule 1 
  action                Add rule specific action
  deny                  Deny traffic
  permit                Permit traffic
pbnoscli(config-flow-flow01)# rule 1 action 
  <cr>
  override-pop-vlan       Override action to pop the VLAN
  override-push-vlan-tag  Override action to push VLAN Tag
  override-to             Override to configure a rule specific network tool or analyzer ports
pbnoscli(config-flow-flow01)# rule 1 action override-to Ethernet12

You can verify the configuration by using the command(s) below:

PreviousConfiguring Push/Pop VLANNextDisplay Flow Information

Last updated