Configuring Push/Pop VLAN
VLAN aware mode provides OPB administrators with the ability to match and modify packets in the flow before forwarding them to the tool port(s).
You can configure the OPBNOS to modify the flow as below:
Push VLAN - Push a new VLAN Tag onto the egress traffic.
Pop VLAN - Pop(remove) the VLAN Tag from the egress traffic.
This feature is only supported on the NVIDIA platforms
Reference
Command
push-vlan-tag <vid>
Description
push VLAN to traffic matching the rules configured in the map
Parameters
vlanid—within 1 to 4094
Mode
flow
Example
You can verify the configuration by using the command(s) below:
Reference
Command
pop-vlan
Description
pop Vlan Tag from ingress packets received
Parameters
disable/enable
Mode
flow
Example
You can verify the configuration by using the command(s) below:
Last updated