OPBNOS R2.4
Release
  • Open Packet Broker
  • What's New?
  • Getting Started
    • Licensing
    • Downloads
    • Limitations
    • Image Management
      • Installing OPBNOS from ONIE
      • Installing OPBNOS from USB Drive
      • Image Upgrade from OPBNOS
      • Selecting OPBNOS on next boot
      • Removing available images
      • Rebooting the Switch
    • Scalability
  • CLI Configuration Guide
    • Configuring License
    • Configuring Hostname
    • Configuring Username
    • Interface Management
      • Configuring Management Interface
      • Configuring Physical Interface
    • Link Layer Discovery Protocol (LLDP)
      • Enabling LLDP
      • Displaying LLDP Neighbors
    • Configuring Interface Description
    • Configuring Auto Negotiation
    • Configuring FEC
    • Configuring Maximum Transition Unit
    • Configuring Port Speed
    • Configuring Interface Type
    • Configuring VLAN Modes
    • Configuring Loopback Mode
    • Configuring Packet Slicing
    • Configuring Ingress VLAN
    • Configuring Egress Tagging
    • Configuring Tx-only
    • Configuring An-clause
    • Configuring PortChannel
    • Configuring Flows and Rules
      • Configuring Network Ports
      • Configuring Tool Ports
      • Configuring Flows
      • Configuring Flow Description
      • Configuring Flow Rules (NVIDIA)
      • Configuring Flow Rules (Broadcom)
      • Configuring Flow Match Expression Rules
      • Configuring Flow UDF Rules
      • Configuring Push/Pop VLAN
      • Configuring Flow Override Action(s)
      • Display Flow Information
      • Clear Flow Counters
    • Zero Touch Provisioning
      • DHCP Discovery
      • ZTP Boot File
      • Enable ZTP
    • Configuration Management
      • Copying Files To Device
      • Copying Files From Device
      • Copying Running and Startup Configuration
      • Saving Configuration
      • Display Configuration
      • Clearing Startup configuration
    • Ping
    • Traceroute
    • Configuring NTP
    • Configuring Timezone
    • Configuring SYSLOG
    • Configuring SNMP
      • Configure SNMP community
      • Configuring SNMP Trap
      • Configuring SNMP Threshold
      • Configuring SNMP User
      • Configuring SNMP Location
      • Configuring SNMP Contact
    • Configuring AAA and TACACS
      • Configuring AAA
      • Configuring TACACS Server
    • Configuring GTP
    • Configuring VxLAN
    • Configuring sFlow
    • Display Interface Information
      • Front Panel Port Mapping
    • Display System Information
      • Interface Transceiver Information
      • System Uptime
      • Reboot Cause
      • Show Environment
      • Show System Memory
      • Show Docker Memory
      • Show Services
      • Show Platform Fan
      • Show platform pcieinfo
      • Show Platform PSU
      • Show Platform SSD
      • Show Platform Summary
      • Show Platform Syseeprom
      • Show Platform Temperature
    • Troubleshooting
  • Aviz FlowVision Graphical User Interface Guide
    • FlowVision OVA installation
    • System
      • Viewing the Dashboard
      • Accessing System and Device Information
      • Managing Topologies
      • Managing Devices
      • Viewing System Log
      • Managing Users
      • Performing Backup and Restore
      • Viewing Audit Logs
    • Configuration
      • Configuring Ports
      • Configuring Port Groups
      • Configuring Rule Templates
      • Configuring Flows
    • Statistics
      • Viewing Port Statistics
      • Viewing Flow Statistics
    • Help
  • REST API Guide
    • FLOW
    • Interface Management
    • Port Channel
    • LLDP
    • SNMP
    • System and Platform
    • Statistics
  • Use Cases
    • For Engineers
      • VxLAN Deployment (NVIDIA)
      • GTP Deployment
      • Truncation and Load Balancing
      • Ingress VLAN and Egress Tagging
      • Loopback-mode Port
      • VLAN Mode/Tag Actions
    • Command Reference
      • Converting Network-to-Tool port
      • Configuring 1G Electrical SFP
  • Solution Integration
    • Visibility and Analysis with Arkime, Elasticsearch & Kibana
      • Solution Components
      • Configuring OPBNOS
      • Installing Arkime
      • Installing Kibana
      • Troubleshooting
  • Support
    • How to contact Aviz Networks Support?
Powered by GitBook
On this page

Was this helpful?

  1. Getting Started
  2. Image Management

Image Upgrade from OPBNOS

To upgrade image to a newer version from OPBNOS CLI, use the following command:

Command

copy scp <server_url> [timeout <interval> ] { sonic-image }

Description

Copies new file OS image from remote SCP server and install to the switch

Parameters

Server_url username@ipaddress:filepathandname

timeout timeout

interval Specifies the maximum time (in seconds) to wait for the server to reply to the connection request. The timeout interval is from 1 to 100 seconds.

sonic-image Copies OS image.

Mode

EXEC

CLI Example:

pbnoscli# copy aviz@10.2.2.10:/tmp/sonic-pbnos-2.1.1.bin sonic-image
aviz@10.2.2.10's password: 
opb-nos-mellanox-20220714.2.1.1.bin            21%  301MB  11.1MB/s   01:38 ETA
New image will be installed, continue? [y/N]: y

//After installation is complete, perform a reboot
pbnoscli# reboot

To verify, Please run below command:

pbnoscli# show boot 
Current: SONiC-OS-2.1.1_RELEASE.0-dirty-20220718.065117
Next: SONiC-OS-2.1_RELEASE.0-dirty-20220708.081017
Available: 
SONiC-OS-2.1_RELEASE.0-dirty-20220708.081017
SONiC-OS-2.1.1_RELEASE.0-dirty-20220718.065117

pbnoscli# show version 

Aviz OPB NOS Version: 2.1.1
Distribution: Debian 10.12
Kernel: 4.19.0-12-2-amd64

Platform: x86_64-mlnx_msn2010-r0
HwSKU: ACS-MSN2010
ASIC: mellanox
ASIC Count: 1
Serial Number: MT1950X22457
Model Number: MSN2010-CB2FO
Hardware Revision: A3
Uptime: 09:15:47 up 6 min,  3 users,  load average: 0.85, 0.77, 0.40

Docker images:
REPOSITORY                TAG                                     IMAGE ID            SIZE
docker-syncd-mlnx         2.1.1_RELEASE.0-dirty-20220718.065117   c49cafa97c90        1.02GB
docker-syncd-mlnx         latest                                  c49cafa97c90        1.02GB
docker-platform-monitor   2.1.1_RELEASE.0-dirty-20220718.065117   cc38846836f5        756MB
docker-platform-monitor   latest                                  cc38846836f5        756MB
docker-snmp               2.1.1_RELEASE.0-dirty-20220718.065117   de3c7e6fc5bd        469MB
docker-snmp               latest                                  de3c7e6fc5bd        469MB
docker-lldp               2.1.1_RELEASE.0-dirty-20220718.065117   850ee2056916        465MB
docker-lldp               latest                                  850ee2056916        465MB
docker-orchagent          2.1.1_RELEASE.0-dirty-20220718.065117   3b45db504ac0        455MB
docker-orchagent          latest                                  3b45db504ac0        455MB
docker-sflow              2.1.1_RELEASE.0-dirty-20220718.065117   ab6a91f4f66c        437MB
docker-sflow              latest                                  ab6a91f4f66c        437MB
docker-database           2.1.1_RELEASE.0-dirty-20220718.065117   b4409773f694        425MB
docker-database           latest                                  b4409773f694        425MB
docker-nagr               2.1.1_RELEASE.0-dirty-20220718.065117   831b0a133a57        738MB
docker-nagr               latest                                  831b0a133a57        738MB

pbnoscli# 
PreviousInstalling OPBNOS from USB DriveNextSelecting OPBNOS on next boot

Last updated 2 years ago

Was this helpful?