OPBNOS R2.4
Release
  • Open Packet Broker
  • What's New?
  • Getting Started
    • Licensing
    • Downloads
    • Limitations
    • Image Management
      • Installing OPBNOS from ONIE
      • Installing OPBNOS from USB Drive
      • Image Upgrade from OPBNOS
      • Selecting OPBNOS on next boot
      • Removing available images
      • Rebooting the Switch
    • Scalability
  • CLI Configuration Guide
    • Configuring License
    • Configuring Hostname
    • Configuring Username
    • Interface Management
      • Configuring Management Interface
      • Configuring Physical Interface
    • Link Layer Discovery Protocol (LLDP)
      • Enabling LLDP
      • Displaying LLDP Neighbors
    • Configuring Interface Description
    • Configuring Auto Negotiation
    • Configuring FEC
    • Configuring Maximum Transition Unit
    • Configuring Port Speed
    • Configuring Interface Type
    • Configuring VLAN Modes
    • Configuring Loopback Mode
    • Configuring Packet Slicing
    • Configuring Ingress VLAN
    • Configuring Egress Tagging
    • Configuring Tx-only
    • Configuring An-clause
    • Configuring PortChannel
    • Configuring Flows and Rules
      • Configuring Network Ports
      • Configuring Tool Ports
      • Configuring Flows
      • Configuring Flow Description
      • Configuring Flow Rules (NVIDIA)
      • Configuring Flow Rules (Broadcom)
      • Configuring Flow Match Expression Rules
      • Configuring Flow UDF Rules
      • Configuring Push/Pop VLAN
      • Configuring Flow Override Action(s)
      • Display Flow Information
      • Clear Flow Counters
    • Zero Touch Provisioning
      • DHCP Discovery
      • ZTP Boot File
      • Enable ZTP
    • Configuration Management
      • Copying Files To Device
      • Copying Files From Device
      • Copying Running and Startup Configuration
      • Saving Configuration
      • Display Configuration
      • Clearing Startup configuration
    • Ping
    • Traceroute
    • Configuring NTP
    • Configuring Timezone
    • Configuring SYSLOG
    • Configuring SNMP
      • Configure SNMP community
      • Configuring SNMP Trap
      • Configuring SNMP Threshold
      • Configuring SNMP User
      • Configuring SNMP Location
      • Configuring SNMP Contact
    • Configuring AAA and TACACS
      • Configuring AAA
      • Configuring TACACS Server
    • Configuring GTP
    • Configuring VxLAN
    • Configuring sFlow
    • Display Interface Information
      • Front Panel Port Mapping
    • Display System Information
      • Interface Transceiver Information
      • System Uptime
      • Reboot Cause
      • Show Environment
      • Show System Memory
      • Show Docker Memory
      • Show Services
      • Show Platform Fan
      • Show platform pcieinfo
      • Show Platform PSU
      • Show Platform SSD
      • Show Platform Summary
      • Show Platform Syseeprom
      • Show Platform Temperature
    • Troubleshooting
  • Aviz FlowVision Graphical User Interface Guide
    • FlowVision OVA installation
    • System
      • Viewing the Dashboard
      • Accessing System and Device Information
      • Managing Topologies
      • Managing Devices
      • Viewing System Log
      • Managing Users
      • Performing Backup and Restore
      • Viewing Audit Logs
    • Configuration
      • Configuring Ports
      • Configuring Port Groups
      • Configuring Rule Templates
      • Configuring Flows
    • Statistics
      • Viewing Port Statistics
      • Viewing Flow Statistics
    • Help
  • REST API Guide
    • FLOW
    • Interface Management
    • Port Channel
    • LLDP
    • SNMP
    • System and Platform
    • Statistics
  • Use Cases
    • For Engineers
      • VxLAN Deployment (NVIDIA)
      • GTP Deployment
      • Truncation and Load Balancing
      • Ingress VLAN and Egress Tagging
      • Loopback-mode Port
      • VLAN Mode/Tag Actions
    • Command Reference
      • Converting Network-to-Tool port
      • Configuring 1G Electrical SFP
  • Solution Integration
    • Visibility and Analysis with Arkime, Elasticsearch & Kibana
      • Solution Components
      • Configuring OPBNOS
      • Installing Arkime
      • Installing Kibana
      • Troubleshooting
  • Support
    • How to contact Aviz Networks Support?
Powered by GitBook
On this page

Was this helpful?

  1. Use Cases
  2. Command Reference

Configuring 1G Electrical SFP

If an Electrical SFP fails to transfer link status to the switch side, configuring an-clause cl37 and enabling autoneg can resolve this issue. An example is configuring this feature to support the FINISAR SFP FTLX1471D3BCL on Edge-Core AS5812.

To set up a port for supporting a 1G Electrical SFP, follow the steps outlined below:

This feature is only supported on Broadcom platforms

  1. Configure speed on the port

pbnoscli(config)# interface ethernet Ethernet3
pbnoscli(config-if)# speed 1000
  1. Configure the an-clause to support 1G Electrical pluggable

pbnoscli(config)# interface ethernet Ethernet3
pbnoscli(config-if)# an-clause cl37
  1. configure auto-neg on the port

pbnoscli(config)# interface ethernet Ethernet3
pbnoscli(config-if)# no autoneg disable
pbnoscli# show interface status 
================================================================================================
Port            Name                            Oper    Admin   Vlan    Speed   MTU     AutoNeg 
================================================================================================
Ethernet1/1     tenGigE1                        down    up      routed  10000   9100    N/A     
Ethernet2/1     tenGigE2                        up      up      routed  1000    9100    on      
Ethernet3/1     tenGigE3                        down    up      routed  10000   9100    N/A     
Ethernet4/1     tenGigE4                        down    up      routed  10000   9100    N/A     
<...>
Ethernet52/1    fourtyGigE52                    down    up      routed  40000   9100    N/A     
Ethernet53/1    fourtyGigE53                    down    up      routed  40000   9100    N/A     
Ethernet54/1    fourtyGigE54                    down    up      routed  40000   9100    N/A     
pbnoscli# 

Note that if any changes on autoneg is made to the port, you must follow these exact steps in order:

Autoneg Disable to Enable:
---------------------------
pbnoscli(config)# interface ethernet Ethernet2
pbnoscli(config-if)# no an-clause cl37
pbnoscli(config-if)# an-clause cl37
pbnoscli(config-if)# no autoneg disable

pbnoscli# show running-config 
configure terminal
interface ethernet Ethernet2/1
speed 1000
an-clause cl37
!
interface mgmt
ip address 10.4.4.53/23 gateway 10.4.4.1
!
pbnoscli#
PreviousConverting Network-to-Tool portNextVisibility and Analysis with Arkime, Elasticsearch & Kibana

Last updated 2 years ago

Was this helpful?