Configuring SNMP Location

You can configure the SNMP Location string using the below command:

Reference

Command	[no] snmp-server location <location_name>
Description	SNMP location configuration
Parameters	SNMP location
Mode	CONFIG

Example

pbnoscli# configure terminal
pbnoscli(config)# snmp-server 
  community             Community string authentication
  contact               Configure SNMP contact
  location              Configure SNMP location
  trap                  Trap configuration
  user                  SNMP user
pbnoscli(config)# snmp-server location 
  <loc_str>                
pbnoscli(config)# snmp-server location Location-1
pbnoscli(config)#

pbnoscli(config)# no snmp-server location           
pbnoscli(config)# 

You can verify the configuration by using the command(s) below:

pbnoscli# show snmp-location 
===================================================
Location     
===================================================
Location-1
pbnoscli# 

pbnoscli# show running-config 
configure terminal
!
interface mgmt
ip address 10.4.4.52/24 gateway 10.4.4.1
!
snmp-server location Location-1
!
pbnoscli#