Configuring Ingress VLAN

You can use the Ingress VLAN functionality to assign dedicated identification tags (VLAN Tags) and thereby creating a mapping between the network port and tool ports. Traffic received on network ports can be added with an additional VLAN tag and sent towards the tools for identifying the Network Port. Ingress VLAN is configured in the interface configuration of the network port.

Reference

Command	[no] ingress-vlan <value>
Description	Ingress-vlan configuration
Parameters	value within 500 to 4094
Mode	INTERFACE

• This feature should only be configured on Network ports

Example

pbnoscli# configure terminal 
pbnoscli(config)# interface ethernet Ethernet8/1
pbnoscli(config-if)# ingress-     
  ingress-vlan          Add ingress vlan (range 500...4094)
pbnoscli(config-if)# ingress-vlan 501
pbnoscli(config-if)# 

You can verify the configuration by using the command(s) below:

pbnoscli# show interface npb Ethernet8/1

===================================
Interface : Ethernet8/1       
===================================
Type           : network         
Mode           : vlan-aware      
Ingress-vlan   : 501             
Egress-tagging : disable         

pbnoscli# 

pbnoscli# show running-config 
configure terminal
!
interface ethernet Ethernet8/1
ingress-vlan 501
mode vlan-aware
type network
!
interface mgmt
ip address 10.4.4.53/23 gateway 10.4.4.1
!
pbnoscli#