Configuring SNMP Contact

You can configure the SNMP Contact string using the below command:

Reference

Command	[no] snmp-server contact contact-name <contact_name> contact-mail <Contact_mail>
Description	SNMP contact configuration
Parameters	SNMP contact
Mode	CONFIG

Example

pbnoscli# configure terminal 
pbnoscli(config)# snmp-server
pbnoscli(config)# snmp-server contact contact-name 
 <cont_name>           
pbnoscli(config)# snmp-server contact contact-name test-engineer 
  contact-mail
pbnoscli(config)# snmp-server contact contact-name test-engineer contact-mail [e-mail] 
pbnoscli#


pbnoscli(config)# no snmp-server contact
pbnoscli# 

You can verify the configuration by using the command(s) below:

pbnoscli# show snmp-contact 
===================================================
Contact      
===================================================
Contact Name : test-engineer
Contact Mail : [e-mail]
pbnoscli# 

pbnoscli# show running-config 
configure terminal
!
interface mgmt
ip address 10.4.4.52/24 gateway 10.4.4.1
!
snmp-server contact contact-name test-engineer contact-mail [e-mail]
snmp-server location Location-1
!
pbnoscli#