Configuring Flow Description

You can specify the description of the flow. The description can contain upto 48 characters long and is case-sensitive.

Reference

Command	description <string>
Description	Description configuration
Parameters	string—maximum 50 characters, within double quotes.
Interface	FLOW

Example

pbnoscli# configure terminal 
pbnoscli(config)# flow flow01
pbnoscli(config-flow-flow01)# descript    
  description           Configure description for flow
pbnoscli(config-flow-flow01)# description "--Flow Description--"
pbnoscli(config-flow-flow01)# 

//to remove flow description
pbnoscli(config-flow-flow01)# no description
pbnoscli(config-flow-flow01)# 

You can verify the configuration by using the command(s) below:

pbnoscli# show flow flow01

===================================
Flow : flow01 (CLI)
===================================
Status       : enable          
Description  : --Flow Description--
pbnoscli# 

pbnoscli# show running-config
configure terminal
!
interface mgmt
ip address 10.4.4.53/23 gateway 10.4.4.1
!
flow flow01
description "--Flow Description--"
!
pbnoscli#