OPBNOS R2.5
Release
  • Open Packet Broker
  • What's New?
  • Getting Started
    • Licensing
    • Limitations
    • Image Management
      • Installing OPBNOS from ONIE
      • Installing OPBNOS from USB Drive
      • Image Upgrade from OPBNOS
      • Selecting OPBNOS on next boot
      • Removing available images
      • Rebooting the Switch
    • Supported HwSku
    • Scalability
    • Downloads
  • CLI Configuration Guide
    • Configuring License
    • Configuring Hostname
    • Configuring Username
    • On-Box FlowVision
    • Configuring AAA
      • Configuring AAA
      • Configuring TACACS
      • Configuring RADIUS
    • Interface Management
      • Configuring Management Interface
      • Configuring Physical Interface
    • Link Layer Discovery Protocol (LLDP)
      • Enabling LLDP
      • Displaying LLDP Neighbors
    • Configuring Interface Description
    • Configuring Auto Negotiation
    • Configuring FEC
    • Configuring Maximum Transition Unit
    • Configuring Port Speed
    • Configuring Interface Type
    • Configuring VLAN Modes
    • Configuring Loopback Mode
    • Configuring Packet Slicing
    • Configuring Ingress VLAN
    • Configuring Egress Tagging
    • Configuring Tx-only
    • Configuring An-clause
    • Configuring PortChannel
    • Configuring LAG Hash
    • Configuring Flows and Rules
      • Configuring Network Ports
      • Configuring Tool Ports
      • Configuring Flows
      • Configuring Flow Description
      • Configuring Flow Rules (NVIDIA)
      • Configuring Flow Rules (Broadcom)
      • Configuring Flow Match Expression Rules
      • Configuring Flow UDF Rules
      • Configuring Push/Pop VLAN
      • Configuring Flow Override Action(s)
      • Display Flow Information
      • Clear Flow Counters
    • Configuring GTP Flow
    • Configuring VxLAN Flow
    • Configuring SNMP
      • Configure SNMP community
      • Configuring SNMP Trap
      • Configuring SNMP Threshold
      • Configuring SNMP User
      • Configuring SNMP Location
      • Configuring SNMP Contact
    • Configuring SYSLOG
    • Ping
    • Traceroute
    • Configuring NTP
    • Configuring Timezone
    • Configuring sFlow
    • Display Interface Information
      • Front Panel Port Mapping
    • Display System Information
      • Interface Transceiver Information
      • System Uptime
      • Reboot Cause
      • Show Environment
      • Show System Memory
      • Show Docker Memory
      • Show Services
      • Show Platform Fan
      • Show platform pcieinfo
      • Show Platform PSU
      • Show Platform SSD
      • Show Platform Summary
      • Show Platform Syseeprom
      • Show Platform Temperature
    • Configuration Management
      • Copying Files To Device
      • Copying Files From Device
      • Copying Running and Startup Configuration
      • Saving Configuration
      • Display Configuration
      • Clearing Startup configuration
    • Zero Touch Provisioning
      • DHCP Discovery
      • ZTP Boot File
      • Enable ZTP
    • Troubleshooting
  • Aviz FlowVision Graphical User Interface Guide
    • FlowVision Controller Installation
      • FV ESXi Host Installation
      • FV VirtualBox Installation
    • System
      • Viewing the Dashboard
      • Accessing System and Device Information
      • Managing Topologies
      • Managing Devices
      • Viewing System Log
      • Managing Users
      • Performing Backup and Restore
      • Viewing Audit Logs
    • Configuration
      • Configuring Ports
      • Configuring Port Groups
      • Configuring Rule Templates
      • Configuring Flows
    • Statistics
      • Viewing Port Statistics
      • Viewing Flow Statistics
    • Help
  • REST API Guide
    • FLOW
    • Interface Management
    • Port Channel
    • LLDP
    • SNMP
    • System and Platform
    • Statistics
  • Use Cases
    • For Engineers
      • VxLAN Deployment (NVIDIA)
      • GTP Deployment
      • Truncation and Load Balancing
      • Ingress VLAN and Egress Tagging
      • Loopback-mode Port
      • VLAN Mode/Tag Actions
    • Command Reference
      • Converting Network-to-Tool port
      • Configuring 1G Electrical SFP
      • Enabling FlowVision On-box Support
  • Solution Integration
    • Network Visibility and Analysis with OPB, Arkime, Elasticsearch & Kibana
      • Installation Pre-Requisites
      • Solution Components
      • Configuring OPBNOS
      • Installing Arkime
      • Installing Kibana
      • Troubleshooting
  • Support
    • How to contact Aviz Networks Support?
Powered by GitBook
On this page

Was this helpful?

  1. CLI Configuration Guide
  2. Display System Information

Show Services

Use the following command to display information about running services on the device:

pbnoscli# show services 
lldp	docker
---------------------------
USER         PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root           1  0.0  0.3  30388 24176 pts/0    Ss+  08:09   0:02 /usr/bin/python3 /usr/local/bin/supervisord
root          12  0.0  0.2  25616 19104 pts/0    S    08:09   0:00 python3 /usr/bin/supervisor-proc-exit-listener --container-name lldp
root          15  0.0  0.0 223808  5616 pts/0    Sl   08:09   0:00 /usr/sbin/rsyslogd -n -iNONE
_lldpd        23  0.0  0.0  28364  7692 pts/0    S    08:09   0:00 lldpd: monitor. 
_lldpd        25  0.0  0.0  28612  3820 pts/0    S    08:09   0:01 lldpd: 2 neighbors.
root          32  0.0  0.2 105268 21700 pts/0    Sl   08:09   0:03 python3 -m lldp_syncd
root          36  0.0  0.2  34608 22280 pts/0    S    08:09   0:00 python3 /usr/bin/lldpmgrd

snmp	docker
---------------------------
USER         PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root           1  0.0  0.3  33644 24436 pts/0    Ss+  08:12   0:01 /usr/bin/python3 /usr/local/bin/supervisord
root          10  0.0  0.2  31100 19440 pts/0    S    08:12   0:00 python3 /usr/bin/supervisor-proc-exit-listener --container-name snmp
root          18  0.0  0.0 223808  5616 pts/0    Sl   08:12   0:00 /usr/sbin/rsyslogd -n -iNONE
Debian-+      22  0.9  0.2  37484 19024 pts/0    S    08:12   0:35 /usr/sbin/snmpd -f -LS4d -Lf /var/log/snmpd.log -u Debian-snmp -g Debian-snmp -I -smux -p /run/snmpd.pid
root          23  4.0  0.4 348084 36636 pts/0    Sl   08:12   2:34 python3 -m sonic_ax_impl

pmon	docker
---------------------------
USER         PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root           1  0.0  0.3  30700 24312 pts/0    Ss+  08:08   0:02 /usr/bin/python3 /usr/local/bin/supervisord
root          47  0.0  0.2  25636 19068 pts/0    S    08:08   0:00 python3 /usr/bin/supervisor-proc-exit-listener --container-name pmon
root          50  0.0  0.0 223808  3632 pts/0    Sl   08:08   0:00 /usr/sbin/rsyslogd -n -iNONE
root          56  0.3  1.0 213980 86084 pts/0    Sl   08:08   0:13 python3 /usr/local/bin/xcvrd
root          58  0.3  1.0 137540 82448 pts/0    S    08:08   0:13 python3 /usr/local/bin/psud
root          60  0.0  1.0 138596 83760 pts/0    S    08:08   0:00 python3 /usr/local/bin/syseepromd
root          61  0.2  1.0 138960 84516 pts/0    S    08:08   0:10 python3 /usr/local/bin/thermalctld
root          63  0.1  1.0 138840 84440 pts/0    S    08:08   0:06 python3 /usr/local/bin/pcied
root          64  0.1  0.7 138960 64100 pts/0    S    08:08   0:05 python3 /usr/local/bin/thermalctld
root          70  0.0  0.0  59092  1076 ?        Ss   08:08   0:00 /usr/sbin/sensord -f daemon
root         408  0.0  0.8 214556 71224 pts/0    S    08:09   0:00 python3 /usr/local/bin/xcvrd

sflow	docker
---------------------------
USER         PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root           1  0.0  0.2  30256 23992 pts/0    Ss+  08:08   0:01 /usr/bin/python3 /usr/local/bin/supervisord
root          10  0.0  0.2  25612 19032 pts/0    S    08:08   0:00 python3 /usr/bin/supervisor-proc-exit-listener --container-name sflow
root          13  0.0  0.0 223808  5424 pts/0    Sl   08:08   0:00 /usr/sbin/rsyslogd -n -iNONE
root          17  0.0  0.1  88328  8124 pts/0    Sl   08:08   0:00 /usr/bin/sflowmgrd
root          18  0.0  0.2  30752 20532 pts/0    S    08:08   0:00 python3 /usr/bin/port_index_mapper.py

nagr	docker
---------------------------
USER         PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root           1  0.0  0.2  59008 21160 pts/0    Ss+  08:08   0:02 /usr/bin/python /usr/local/bin/supervisord
root          10  4.9  1.2 486580 103668 pts/0   Sl   08:08   3:22 /usr/bin/python3 /gemini/NTPRest/naggc.py
root          11  0.0  0.2  60380 18508 pts/0    S    08:08   0:00 /usr/bin/python3 /usr/bin/lag.py
root          12  0.0  0.2  60360 18652 pts/0    S    08:08   0:00 /usr/bin/python3 /usr/bin/netlink_route.py
root          13  0.0  0.2 206576 17192 pts/0    Sl   08:08   0:00 /usr/bin/python3 /usr/bin/toolhc.py
root          14  0.0  0.2  60356 18240 pts/0    S    08:08   0:00 /usr/bin/python3 /usr/bin/netlink_poll.py
root          21  0.0  0.0 262992  3420 pts/0    Sl   08:08   0:00 /usr/sbin/rsyslogd -n

syncd	docker
---------------------------
USER         PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root           1  0.0  0.3  30568 24232 pts/0    Ss+  08:08   0:01 /usr/bin/python3 /usr/local/bin/supervisord
root          10  0.0  0.2  25704 19316 pts/0    S    08:08   0:00 python3 /usr/bin/supervisor-proc-exit-listener --container-name syncd
root          14  0.0  0.0 223808  5576 pts/0    Sl   08:08   0:00 /usr/sbin/rsyslogd -n -iNONE
root          19  1.7  1.5 1784640 128056 pts/0  Sl   08:08   1:09 /usr/bin/syncd -u -s -p /tmp/sai.profile
root          44  5.6 11.1 1365284 895996 pts/0  Sl   08:08   3:49 sx_sdk --logger libsai.so
root          66  0.0  1.9 343036 155164 pts/0   Sl   08:08   0:01 /usr/bin/python3 /usr/bin/mellanox_nagg_asic.py

swss	docker
---------------------------
USER         PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root           1  0.1  0.3  30652 24500 pts/0    Ss+  08:07   0:05 /usr/bin/python3 /usr/local/bin/supervisord
root          26  0.0  0.2  25620 19040 pts/0    S    08:07   0:00 python3 /usr/bin/supervisor-proc-exit-listener --container-name swss
root          29  0.0  0.0 223808  3596 pts/0    Sl   08:07   0:00 /usr/sbin/rsyslogd -n -iNONE
root          34  0.0  0.0  81260  4960 pts/0    Sl   08:07   0:00 /usr/bin/portsyncd
root          39  0.0  0.2 403316 22456 pts/0    Sl   08:08   0:03 /usr/bin/orchagent -d /var/log/swss -b 8192 -s
root          64  0.0  0.1  88384  8176 pts/0    Sl   08:08   0:00 /usr/bin/coppmgrd
root          76  0.0  0.0   3964  2928 pts/0    S    08:08   0:00 /bin/bash /usr/bin/arp_update
root          77  0.0  0.0  81132  4404 pts/0    Sl   08:08   0:00 /usr/bin/neighsyncd
root          79  0.0  0.1  88448  8548 pts/0    Sl   08:08   0:00 /usr/bin/vlanmgrd
root          81  0.0  0.1  88472  8564 pts/0    Sl   08:08   0:00 /usr/bin/intfmgrd
root          83  0.0  0.1  88412  8332 pts/0    Sl   08:08   0:00 /usr/bin/portmgrd
root          85  0.0  0.1  88508 10240 pts/0    Sl   08:08   0:00 /usr/bin/buffermgrd -l /usr/share/sonic/hwsku/pg_profile_lookup.ini
root          98  0.0  0.1  88444  8420 pts/0    Sl   08:08   0:00 /usr/bin/vrfmgrd
root         104  0.0  0.1  88344  8248 pts/0    Sl   08:08   0:00 /usr/bin/nbrmgrd
root         112  0.0  0.1  88472  8332 pts/0    Sl   08:08   0:00 /usr/bin/vxlanmgrd
root         117  0.0  0.0  81176  4796 pts/0    Sl   08:08   0:00 /usr/bin/fdbsyncd
root         122  0.0  0.1  88416  8244 pts/0    Sl   08:08   0:00 /usr/bin/tunnelmgrd
root         153  0.0  0.0   5668  1684 pts/0    S    08:08   0:00 /usr/sbin/ndppd
root        6652  0.0  0.0   2524   744 pts/0    S    09:13   0:00 sleep 300

database	docker
---------------------------
USER         PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root           1  0.0  0.2  30248 23700 pts/0    Ss+  08:07   0:01 /usr/bin/python3 /usr/local/bin/supervisord
root          38  0.0  0.2  25612 19032 pts/0    S    08:07   0:00 python3 /usr/bin/supervisor-proc-exit-listener --container-name database
root          39  0.0  0.0 223808  5616 pts/0    Sl   08:07   0:00 /usr/sbin/rsyslogd -n -iNONE
root          40  4.0  0.7 110832 59672 pts/0    Sl   08:07   2:46 /usr/bin/redis-server 127.0.0.1:6379

pbnoscli# 
PreviousShow Docker MemoryNextShow Platform Fan

Last updated 1 year ago

Was this helpful?