Configuring Strip-Vlan
Strips the Outer Vlan header in the Packet at the ingress stage itself.
This is needed when the original packet from TAP should be retained and Vlan added by APB AGG should be removed. Also when the encap features are present the tag should be removed at the ingress stage itself before adding encap header.
Reference
Command
[no] strip-vlan enable
Description
strip-vlan configuration
Mode
INTERFACE
CLI Commands
pbnoscli# conf t
pbnoscli(config)# interface ethernet Ethernet1/1 pbnoscli(config-if)# strip-vlan enable Enable
pbnoscli(config-if)# strip-vlan enable
Last updated
