search

Configuring SNMP Trap

To configure SNMP traps using the FlowVision GUI, navigate to Configuration > SNMP Traps.

The SNMP Traps configuration page lists connected devices and their respective configured SNMP Traps. You can select individual devices and define SNMP traps.

The following image shows the SNMP Trap page with the switches and configured SNMP Traps:

SNMP Traps

hashtag
Configure SNMP Traps

To create an SNMP Trap,

  1. Start by clicking on the button

  2. Select the switch to configure the SNMP Trap

  3. Configure the SNMP trap Server-ID, Version, Destination IP, Destination Port and community string

    SNMP Configuration

  4. Click on

  5. SNMP Trap is now configured

    SMNP Trap

To delete the existing SNMP Trap, click the icon.

Delete SNMP Trap
PreviousConfiguring FlowsNextStatistics

Last updated