Enable ZTP

ZTP can be force enabled to start up the ZTP process. After enabling ZTP, reboot the switch which triggers the ZTP process to kick start.

To force enable/disable ZTP on the switch, use the following command:

Reference

Example

Trigger ZTP manually -

When you run the above commands, the switch will:

1. It will Trigger the ZTP process and download the image, configuration, and script files.

2. Install the downloaded files.

3. Reboot the switch.

Trigger ZTP during reboot -

When you run the above commands, the switch will:

1. Trigger the ZTP process: The ZTP process will automatically kick in after the switch reboots. ZTP will download the image, configuration, and script files, if any.

2. Install the image, and configuration, and run any script files.

3. After the files are installed, the switch will automatically reboot.