# Accessing System and Device Information

To access the system and device information, click **System** > **General**.

### System Information

The system information table shows you the product name, version information, and technical support information for the system.

The following image shows you the system information tab:

![Table displaying system information](https://content.gitbook.com/content/Uy210FjW8Gkz8ykjDZrg/blobs/pUhQrKdVZBrcgLzWGkX2/Screenshot_1.png)

### Devices Information

The devices information table shows detailed information and properties of each connected device. For each device, the table shows the IP address, the MAC address, the platform on which the device is running, the HWSKU information, the SONiC version of the device, the PBNOS version, and the device uptime in days, hours, and minutes.

![Table displaying devices information](https://content.gitbook.com/content/Uy210FjW8Gkz8ykjDZrg/blobs/7PgYCkrGsaCeT1LvjNxU/Screenshot%202023-07-13%20at%201.08.44%20PM.png)

#### Editing Device Properties

You can edit device properties from the Devices Information table:

1. Click the **Edit** button corresponding to the required device on the Devices Information table.\
   The Device Properties window displays.\
   ![](https://content.gitbook.com/content/Uy210FjW8Gkz8ykjDZrg/blobs/6DuVl8MQQfalevIexz4Q/device_properties.png)
2. Change the required device property value in the editable fields. Currently, you can edit the Hostname, ZTP Status, and GTP value.
3. Click **Save Changes** to apply your changes.

Click the **Reboot Device** button, if you want to reboot the device.

