# Configuring Port Groups

You can group ports from a device together and create port groups. To get to the port groups page from the FlowVision GUI, click **Configuration** > **Port** **Groups**.

The Port Groups page shows you the connected devices and a table that shows the port groups from each device, the port group ID, the name of the ports that are part of the port group and an option to delete any existing port group.

The following image shows the Port Groups page:

![Port Groups Page](https://content.gitbook.com/content/Uy210FjW8Gkz8ykjDZrg/blobs/FD2oK1ZUyunqmrr1vb3a/port_groups_page.png)

### Creating Port Groups

To create a new port group,

1.  Click the ![](https://content.gitbook.com/content/Uy210FjW8Gkz8ykjDZrg/blobs/gIqZjG09Z3R2KLXGZyw3/add_device_icon.png)icon at the top right corner of the port groups page.\
    The Port Group window displays.\


    <figure><img src="https://content.gitbook.com/content/Uy210FjW8Gkz8ykjDZrg/blobs/KmdTRCfih8COd5fdMVx4/Screenshot%202023-07-17%20at%2011.26.09%20AM.png" alt=""><figcaption><p>Port selection for port group</p></figcaption></figure>
2. Select the device where you want to create the port group.
3. Click the required ports to add them to the port group. The added ports are displayed in the **Select ports to create Groups** field.
4. Specify a number i.e. say 1 to 15, for the port group in the **Port Group Id** field.
5. Click **Save**.
