1 of 1

Layer 3

Description

Test Case ID

Topology

PD(Platform dependent) means that FTAS is designed to work with specific hardware and software configurations and may not be compatible with other platforms.

Layer 3

Description

Test Case ID

Topology

PD(Platform dependent) means that FTAS is designed to work with specific hardware and software configurations and may not be compatible with other platforms.

Verify that ping works over ECMP

test_ping_013

Verify that IP address can be configured over SVI

test_IP_001

Verify that IP address can be configured over routed port

test_IP_002

Verify SVI and routed ports can be admin down or up

test_IP_005

Verify connected route gets created for the SVI subnet in the ip route table.

test_IP_006

Verify IP interface is operational for SVI with LACP portchannel members

test_IP_011

Verify ip address can be configured over routed PCH.

test_IP_014

Verify BGP AS configuration works properly

test_bgp_001

Verify BGP peering happens with nodes in same AS and iBGP neighbor table gets updated properly

test_bgp_002

Verify BGP peering happens with nodes in different AS and eBGP neighbor table gets updated properly

test_bgp_003

Verify BGP route learning using eBGP with routes injected from IXIA

test_bgp_004

Verify BGP route removal using eBGP with routes withdrawn from IXIA

test_bgp_005

Verify BGP route relearn over different neighbor when interface is shutdown

test_bgp_006

Verify unnumbered functionality with iBGP

test_qual_bgp_001

Yes

Verify unnumbered functionality with eBGP

test_qual_bgp_002

Yes

Verify BGP route redistribution in DUT

test_qual_bgp_003

Verify BGP6 functionality

test_qual_bgp_004

Verify BGPV6 Functionality in DUT

test_qual_bgp_ebgp_004

Verify BGP AS-PATH prepend functionality

test_qual_bgp_007

Verify BGP route map match prefix list, access-list deny and permit functionality

test_qual_bgp_008

Verify BGP route map match AS-PATH permit and deny functionality

test_qual_bgp_009

Verify BGP route map match community list permit and deny functionality

test_qual_bgp_010

Verify BGP max MED functionality

test_qual_bgp_011

Verify BGP maximum prefix limit per peer functionality

test_qual_bgp_013

Verify BGP communities functionality

test_qual_bgp_014

Verify BGP regexp match single and multi AS permit & deny action using AS-path access lists

test_qual_bgp_015

Verify BGP regexp match any AS permit and deny action using AS-path access lists

test_qual_bgp_016

Verify BGP regexp match range of BGP communities functionality

test_qual_bgp_017

Verify BGP peering working with BGP listen range

test_qual_bgp_019

Verify VRF functionality

test_qual_vrf

Yes

Verify VLAN 1 support for Host connectivity

test_qual_vlan1

Yes

Verify IPV6 neighbor discovery

test_qual_ipv6_neighbor

Verify L3 DROP ACL functionality with matching source IP and source port

test_acl_001

Verify L3 DROP ACL functionality with matching destination IP and destination port

test_acl_002

Verify L3 DROP ACL functionality with matching SIP, DIP, SPORT, DPORT

test_acl_003

Verify L3 DROP ACL with ACL rule having subnet mask

test_acl_004

Verify L3 DROP ACL est acl rule with protocol = TCP

test_acl_005

Verify L3 DROP ACL - Test acl rule with protocol = UDP

test_acl_006

Verify L3 PERMIT ACL functionality with matching source IP and source port

test_acl_007

Verify L3 PERMIT ACL functionality with matching destination IP and destination port

test_acl_008

Verify L3 PERMIT ACL functionality with matching SIP, DIP, SPORT, DPORT

test_acl_009

Verify L3 PERMIT ACL with ACL rule having subnet mask

test_acl_010

Verify L3 PERMIT ACL - Test acl rule with protocol = TCP

test_acl_011

Verify L3 PERMIT ACL - Test acl rule with protocol = UDP

test_acl_012

Verify Drop ACL (IPv6) for matching source IPv6/L4 address and source IPv6L4 port

test_qual_ip6_acl_001

Verify Drop ACL (IPv6) for matching destination IPv6/L4 port and source IPv6L4 port

test_qual_ip6_acl_002

Verify drop ACL - matching IPv6 params subnet, dst, src ports combined

test_qual_ip6_acl_003

Verify PERMIT ACL (IPv6) for matching source IPv6/L4 address and source IPv6L4 port

test_qual_ip6_acl_004

Verify Permit ACL (IPv6) for matching destination IPv6/L4 port and source IPv6L4 port

test_qual_ip6_acl_005

Verify drop ACL - matching IPv6 params subnet, dst, src ports combined

test_qual_ip6_acl_006

Verify whether static ARP entry can be configured

test_arp_003

Verify that the DUT will respond to an ARP Request for the SVI interface

test_arp_007

Verify whether clear ARP entries works properly

test_arp_011

Verify whether ARP entries are flushed after some time

test_arp_012

Yes

Verify eBGP multi-AS config, adjacency, route convergence and data path using router interface

test_bgp_netops_001

eBGP Multi-AS Route Convergence and data path using loopback

test_bgp_netops_002

BGP Node Drain - Add route-map to remove and restore SPINE node 1 and 2 using Community list

test_bgp_netops_003_004

Test Link drain - Apply Route-Map permit

test_bgp_netops_005_006

Node drain: with IPv6 Traffic Test Node Drain (Spine 1 and Spine 2) for IPv6 Traffic/Prefixes

test_bgp_netops_007

Link drain with IPv6 Traffic Test Link Drain for IPv6 Traffic/Prefixes

test_bgp_netops_008

Node drain using prefix-lists

test_bgp_netops_009

Test Link Drain with Prefix Lists

test_bgp_netops_010

Node drain/restore using AS path prepend list

test_bgp_netops_011_012

Link drain using AS path prepend

test_bgp_netops_014

MC-LAG L3 validation using port-channel configuration

test_mclag_layer3_steady_state

Yes

MC-LAG L3 validation, Bring down the member link of SPINE01

test_mclag_layer3_member_link_down

Yes

MC-LAG L3 keepalive link down

test_mclag_layer3_keepalive_link_down

Yes

MCLAG-L3 Active Reboot

test_mclag_layer3_active_reboot

Yes

MCLAG-L3 Standby Reboot

test_mclag_layer3_standby_reboot

Yes

Symmetric IRB with EVPN eBGP-RIF with s1_as_num=3000, s2_as_num=4000

test_bgp4_evpn_vxlan_009

Yes

Symmetric IRB with EVPN iBGP-RIF with s1_as_num=5000, s2_as_num=5000

test_bgp4_evpn_vxlan_010

Yes

Symmetric IRB with EVPN iBGP-SVI with s1_as_num=5000, s2_as_num=5000

test_bgp4_evpn_vxlan_012

Yes

Symmetric IRB with EVPN eBGP-RPCH with s1_as_num=3000, s2_as_num=4000

test_bgp4_evpn_vxlan_013

Yes

Symmetric IRB with EVPN iBGP-RPCH with s1_as_num=5000, s2_as_num=5000

test_bgp4_evpn_vxlan_014

Yes

Apply QoS with DSCP-0 to TC-0 mapping

test_dscp_0_tc_0

Yes

Apply QoS with DSCP-8 to TC-1 mapping

test_dscp_8_tc_1

Yes

Apply QoS with DSCP-16 to TC-2 mapping

test_dscp_16_tc_2

Yes

Apply QoS with DSCP-24 to TC-3 mapping

test_dscp_24_tc_3

Yes

Apply QoS with DSCP-32 to TC-4

mapping

test_dscp_32_tc_4

Yes

Apply QoS with DSCP-40 to TC-5 mapping

test_dscp_40_tc_5

Yes

Apply QoS with DSCP-48 to TC-6 mapping

test_dscp_48_tc_6

Yes

Apply QoS with DSCP-56 to TC-7 mapping

test_dscp_56_tc_7

Yes

Validate whether the DUT applies QoS using DOT1P-0 to TC-0 mapping

test_dot1p0_tc0

Yes

Validate whether the DUT applies QoS using DOT1P-1 to TC-1 mapping

test_dot1p1_tc1

Yes

Validate whether the DUT applies QoS using DOT1P-2 to TC-2 mapping

test_dot1p2_tc2

Yes

Validate whether the DUT applies QoS using DOT1P-3 to TC-3 mapping

test_dot1p3_tc3

Yes

Validate whether the DUT applies QoS using DOT1P-4 to TC-4 mapping

test_dot1p4_tc4

Yes

Validate whether the DUT applies QoS using DOT1P-5 to TC-5 mapping

test_dot1p5_tc5

Yes

Validate whether the DUT applies QoS using DOT1P-6 to TC-6 mapping

test_dot1p6_tc6

Yes

Validate whether the DUT applies QoS using DOT1P-7 to TC-7 mapping

test_dot1p7_tc7

Yes

Verify basic EVPN VxLAN functionality

test_evpn_vxlan_feature

Yes

Configure EVPN-VXLAN and send bidirectional L3 traffic with intra-VLAN

test_evpn_vxlan_l3_traffic

Yes

Configure EVPN-VXLAN and send bidirectional L3 traffic with intra-VLAN for 16K routes

test_bgp_evpn_vxlan_l3_intra_vlan_scale_16k

Yes

Configure EVPN-VXLAN and send bidirectional L3 traffic with intra-VLAN for 32K routes

test_bgp_evpn_vxlan_l3_intra_vlan_scale_32k

Yes

Configure EVPN-VXLAN and send bidirectional L3 traffic with intra-VLAN for 64K routes

test_bgp_evpn_vxlan_l3_intra_vlan_scale_64k

Yes

Configure EVPN-VXLAN and send bidirectional L3 traffic with intra-VLAN for 128K routes

test_bgp_evpn_vxlan_l3_intra_vlan_scale_128k

Yes

Configure EVPN-VXLAN and send bidirectional L3 traffic with inter-VLAN

test_evpn_vxlan_l3_inter_vlan

Yes

Configure EVPN-VXLAN and send bidirectional L3 traffic with inter-VLAN for 16K routes

test_bgp_evpn_vxlan_inter_vlan_scale_16k

Yes

Configure EVPN-VXLAN and send bidirectional L3 traffic with inter-VLAN for 32K routes

test_bgp_evpn_vxlan_inter_vlan_scale_32k

Yes

Configure EVPN-VXLAN and send bidirectional L3 traffic with inter-VLAN for 64K routes

test_bgp_evpn_vxlan_inter_vlan_scale_64k

Yes

Configure EVPN-VXLAN and send bidirectional L3 traffic with inter-VLAN for 128K routes

test_bgp_evpn_vxlan_inter_vlan_scale_128k

Yes